190mm long and 150mm wide, the SW-01 is a compact, highly fun 4WD chassis. A Type 370 motor is central in the slim monocoque frame, with gears transmitting its output to the front and rear of the model, where 70mm tires translate it into a powerful drive. The chassis power source is mounted in the top section to allow wild wheelies under acceleration. Strut type 4-wheel independent coil sprung suspension utilizes single piece upper arms to link left and right wheel steering motion, helping suppress roll during turns, and together with front and rear differentials realize a tight turning circle.
The model's power source is mounted on the top of the chassis, assisting with super exciting wheelies!
A close-up of the steering. The one-piece front upper arm is attached to the steering linkage for lean.
The central Type 370 motor transmits power to front and rear via gears in a 4WD setup.
A moving upper arm links left and right suspension, cushioned by MacPherson struts.
This image shows the rear suspension, which employs the same strut setup as is used on the front.
The wheelie bar assists wheels in the air action, while exhaust depictions add a layer of realism